Description:
J-Tech Digital’s JTD3DSP0104 1×4 HDMI splitter allows you to distribute your audio/video signal from 1 source device to 4 displays simultaneously. It supports 4K@60Hz 4:2:0 resolution and is HDMI 1.4 and HDCP 1.4 compliant. This splitter is perfect for use with Blu-ray players, PC/laptops, gaming consoles, media devices, and more. Simple plug-and-play allow for easy integration within your setup.
Features
- 1 HDMI Input | 4 HDMI Outputs
- Supports up to 4K@60Hz 4:2:0 resolution
- HDMI 1.4 | HDCP 1.4 Compliant
- Supported Audio Formats Include: PCM Stereo, Dolby Digital, DTS, DTS-HD, DSD
- Supports input HDMI cable distance up to 35ft
- HDMI signal retiming, no loss in quality
Package Contents
- (1) x JTD3DSP0104 HDMI Splitter
- (1) x USB Power Cable
- (1) x User Manual
Rita –
Works well
Lee Tyler –
This unit has worked without problem for many months now.
Lester Kallus –
Mine didn’t work. It wasn’t just some new connections that wouldn’t work. I also tried it on connections that did work with other splitters and tried it with different wires – none of these resulted in any signal getting through. The screen on each attempt gave the following message: “An incompatible video signal has been received. Check your output device.” Fortunately, Amazon has such a great return system that I was able to have it going back just 2 days after delivery.
TexasRanger1975 –
I just installed this, so I can’t say anything about how long it will last. But this device worked perfectly where other models I bought (from other manufacturers) did not work. My setup is the simplest possible – input from a cable TV box, outputs to two TVs. I tested this device under all circumstances, and it always worked – with either TV on or off, with a TV on but switched to another input, with either output cable unplugged, and turning the input signal (the cable TV box) on and off repeatedly. Every time, it supplied both audio and video to the connected outputs without any problems.
Since I went through several defective devices (made by various manufacturers) before finding one that worked, I have some suggestions.
1. When installing the device, do these steps in the following order:
(a) Make sure that the power is off for the splitter.
(b) Turn off the power for your input and output devices (in my case the cable box and TVs). You don’t have to unplug them – just turn them
Winston Brown –
Finally a splitter that will allow me to play off my computer “high resolution multi channel” surround sound music files. I have a multichannel set up in my living room (for home theater), my back yard (for parties) and my garage for “man cave” stuff. I can send via HDMI music to all three locations or any combination of locations. No more plugging and unplugging hdmi cables in to my computer. Best of all, for parties, I can play music perfectly sync’ed to all three locations. Do youself a favor and get good quality high speed HDMI cables. I bought OSD brand and they work just fine.